What do you mix UPOL high build primer with?
Mix 4:1 for a primer filler, 4:1:1 for a primer surfacer or 4:1:2 for a primer sealer.
- Use for spot repair and large panels.
- Excellent build and surface leveling properties.
- Easy to sand wet or dry.
- Can be applied direct to metal, over most plastics and over unsanded E-coat, aluminum* and galvanized*
What is high build primer for?
High-Build Primer Surfacer is a flexible acrylic coating for priming steel, aluminum, urethane, fiberglass and plastics. Check local VOC regulations to ensure compliance of all products in your area.
Is 2k primer a high build primer?
2K High Build Primers are a high quality two-component extra build / easy sand acrylic urethane primer with excellent build, colour holdout and durability.
What is UPOL primer?
A primer with ultra high build filling properties for a very smooth surface prior to application of the topcoat. Ideal for spot repairs on fully cured paint, polyester body fillers, GRP and prepared steel. Produces a similar film thickness to spray applied primers. Fast drying, easy to sand.
What is 2K urethane primer?
Finish 1™ 2K HS Urethane Primer is a premium, two-component primer surfacer designed for high build and excellent filling of repairs. It provides excellent adhesion and gloss and color holdout. FP410 sands easily without clogging the sandpaper, while providing excellent resistance to sand scratch swelling.
Is high build primer the same as filler primer?
Some restorers believe filler primer is little more than liquid body filler. In most cases, the filler primer or high-build primer is also a urethane product. You can generally add as many coats of filler primer as you want, sanding between each coat (as some restorers do) or after every three or four coats.
Will high build primer fill scratches?
Registered. High build primer will fill 80 grit scratches but it may take several coats.
How much will high build primer hide?
High build primer can be a god send if you have a small imperfection in a panel, you can hide small scratches,small dents,etc etc as long as you know what you are doing. I generally will put 2 or 3 good coats on an iffy panel, let it dry then dust with a dark spray can then wet flat back with 800.
What is high build drywall primer?
BEHR PRO High Build Interior Primer is recommended for new and previously coated drywall and plasterboard walls and ceilings. It is a primer that combines skim coating and priming steps into one spray application over properly prepared new drywall.
Which is better 1K or 2K primer?
1K – suited to interior use, low traffic areas, and places less prone to general wear and tear. 2K – suited to exterior use, heavy use areas, high temperature surfaces and other harsh environments.