What is the default password for Polycom IP phone?

Table of Contents

456
What is the default Polycom password? The default Polycom password is 456. If this password does not work, it means that somebody has changed it and you will need to factory reset your phone if you wish to access the admin menu.

How do I reset my Polycom Soundpoint IP 335?

Power cycle the phone. Press Cancel soft key during the boot process. During the countdown, press and hold the following dial pad keys simultaneously until the password prompt appears: IP 335, 560, 5000, and 7000: 1, 3, 5, 7.

How do I reset my PIN on my Polycom phone?

Once the phone is registered and is in an operational mode you can change the default password on a Polycom phone by doing the following:

Click on Menu.
Select option 3. Settings.
Select option 2. Advanced.
Enter Password = 456.
Select option 1.
Select option 6.
Enter Old Password, Set New Password and Confirm New Password.

How do I log into my Polycom phone?

Information

Power on the phone.
Confirm that the PC and phone are on the network.
Enter phone’s IP address into your supported web browser. To display the phone’s IP address, press Menu > 2 (Status) > 2 (Network) > 1 (TCP/IP Parameters).
For Username, enter: Polycom.
For Password, enter: 456.

How do I reset my Polycom VVX admin password?

Release the About key to return to the Welcome menu and before the timer expires press and hold the number 1, 3, and 5, simultaneously on the dial pad for a few seconds until and a new screen should appear prompting for the password to reset the phone.

How do I reset my Polycom to factory settings?

Follow the steps below to factory reset your Polycom phone:

Press the Menu or Home button.
Select Settings > Advanced. The default admin password is 456.
Select Administration Settings.
Select Reset to Defaults.
Select Reset to Factory.
Select Yes to confirm.

How do I access my Polycom settings?

You can access the Polycom Web Configuration Utility using any compatible web browser installed on your PC.

Power on the phone.
Confirm that the PC and phone are on the network.
Enter phone’s IP address into your supported web browser.
For Username, enter: Polycom.
For Password, enter: 456.

How do I log into my Polycom phone interface?

How do you unlock a Polycom phone?

A: To unlock the phones (access the advanced settings menu) enter “456”. This should be the default password. Or you can also go into the web interface of the phones and disable the phone lock feature. Under the “Settings” tab you will see “Phone Lock”.

What is SoundPoint IP 335 for business telephony?

The SoundPoint IP 335 provides business telephony features and functions such as multiple call appearance, call hold, transfer, and conferencing over an IP network. Fastmetrics is a Polycom Authorized Solution Advisor.

How do I factory reset Polycom 335 IP phone?

Step 1 How to factory reset Polycom 335 IP Phone 1. Hold 1+7+3+5 while powering on the device. This will prompt you for a Reset Password.

How do I connect my Polycom 335 to a Poe source?

Using a regular CAT5 cable (optional accessory from Polycom), the phone can be powered from a PoE (IEEE 802.3af) compliant switch or hub. Connect Polycom 335 using a PoE source. Plug the supplied network cable between the LAN jack on the phone and an available power and data port on the in-line power switch.

What are the features of Polycom 335 SIP phone?

Polycom 335 SIP Phone Features ID Name Description 1 Message Waiting Indicator This will alert you to incoming calls, n 2 Do not disturb indicator. 2 Unregistered line. 2 VoiceMail/Messages.