How do I reset my Motorola 7550?

Table of Contents

FACTORY RESET (or “HARD RESET”):

Make sure the power to your unit is ON.
Disconnect the Coaxial cable in the back of your modem.
Use a straightened paperclip, tip of a ballpoint pen, or push pin.
Locate the RESET hole, located in the back of your device.
Push the RESET hole in for 25 seconds, then let go.

How do I manage my Motorola cable modem?

How to login to Motorola router?

Connect your computer to the internet.
Launch any browser and enter your router’s IP address into the search bar. Most Motorola routers use this IP: http://192.168.0.1.
From the login page, enter your username and password.
Click on the login button to access your router’s web interface.

How do I setup my Motorola MT7711?

Activate your MT7711 by opening the Web browser of a computer or other device that’s connected to your MT7711, and enter xfinity.com/activate. Your device can be connected either wirelessly or via one of the MT7711’s Ethernet ports.

What happens if I reset my modem to factory settings?

A reset restores your modem to its factory default settings. It will also erase any customized settings you may have changed, including static IP address setup, DNS, personalized password, WiFi settings, routing and DHCP settings.

What happens if I reset my Motorola modem?

Performing a factory reset will clear out any settings you may have changed or setup (SSID wireless name/password, parental controls, firewall rules, etc.)

Is there an app for Motorola modems?

Your MotoManage app is the fastest and easiest way to optimize your new Motorola Whole Home Mesh WiFi network or MG8702 cable modem.

How many devices can connect to Motorola MG7550?

A Wi-Fi compatible computer, smartphone, tablet, smart TV, game console, security camera or other client device can access the Internet wirelessly through the Motorola MG7550 Cable Modem/Router. You can connect up to 253 devices wirelessly; however multiple devices sharing the same bandwidth will slow your network.

Is there an app for Motorola modem?

Motorola modems do not include a mobile web interface. The user interface can still be accessed and controlled, but without the a mobile web interface. Do you find this helpful? No app.

Is Motorola MG7550 compatible with Xfinity?

This cable modem is suitable for use with the new 250 Mbps and 300 Mbps services available from Comcast, Time Warner and other service providers. Model MG7550 is certified by a number of leading cable service providers including Comcast XFINITY®, Charter Spectrum®, Time Warner Cable®, and Cox®.

Does Motorola MT7711 work with Xfinity?

Motorola’s MT7711 is a 24×8 DOCSIS 3.0 Cable Modem with a built-in AC1900 Dual-Band WiFi Gigabit Router and two phone ports. It is approved by Comcast XFINITY and recommended for actual Internet service speeds up to 400Mbps.

How can I make my Motorola router faster?

Choose “Limit Reservable Bandwidth.” Click “Enable” and lower the bandwidth to zero percent. The default is 20 percent. Click “OK” to accept the changes. This instantly upgrades your Internet connection and increases your Motorola cable modem’s speed by 20 percent.

Where can I find installation instructions for model mg7550?

Basic Installation instructions for Model MG7550 are in the Quick Start that comes with Model MG7550 and that is duplicated in Chapter 2 of this User Guide. Model MG7550 has a Configuration Manager that provides a lot of technical information about Model MG7550 and that tells you how to do some useful things as summarized below.

How long does it take to activate the mg7550?

Once your MG7550 is activated either online or by phone, your service provider will provision your MG7550 service. Typically this takes less than 5 minutes, but in some cases this may take 30 minutes or longer to complete. Try to browse the Web using a device connected via Ethernet or Wi-Fi to the MG7550.

How do I troubleshoot my mg7550’s wireless network issues?

First go in to your MG7550’s Configuration Manager. 3. Click the Advanced button at the top of the page, then click the Wireless and Scan/Bridge menu items at the top of the page. 4. Select the band you are having trouble with. Then click the ScanWirelessAPs button.

How do I change the firewall settings in mg7550?

Model MG7550 comes with reasonable firewall settings. The firewall allows all normal traffic to pass, but protects against well-known attacks. Normally you just leave the firewall settings in place. If you want to change them, you go to the ProtectionÆFirewall section of the Configuration Manager.