How hard is massaranduba?
Hardness– Massaranduba, like Ipe, is one of the hardest woods in the world with a Janka Hardness rating of up to 3,190. Compare that to Oak, at about 1,200. This extreme hardness lends to its dimensional stability, long lifespan, and natural weatherproof properties.
How do you maintain a Brazilian wood deck?
To maintain the color and pronounced grain patterns, you must finish the deck periodically with a good oil-based deck finish made especially for hardwoods. Finishes that are not specifically developed for hardwoods do not penetrate the wood enough for proper protection.
How do you maintain a Cumaru deck?
Cumaru should be treated with a UV coating every year for the first 4 or 5 years. This prevents splintering and cracking from weather and sunlight. After the 5th year, you can let the wood naturally fade to a silver tone, or maintain finish and UV coatings.
How long does it take for Ipe to turn GREY?
An experienced ipe deck builder told me to not sand ipe as you remove the layers of dead cells which absorb the sealer. That was why it turned grey in about 4-5 months. Also, lay the boards end grain curving downward to drain better and avoid “cupping” after rain.
How do you keep Ipe looking new?
If you love the color of your new deck and want to preserve those hues, you’ll need to use a sealer on your ipe every year or two. Consider Hardwood Decking’s Ipe Oil Hardwood Deck Finish & UV Protector. This product protects and preserves the beauty of your ipe deck.
Can you stain massaranduba?
Massaranduba Decking, also known as Brazilian Redwood Decking, has a rich red to brown coloring with a beautiful straight grain and a uniform, fine texture. If left untreated, Massaranduba decking will become a silverish-gray. It can be oiled or stained to retain its distinctive red color.
Is ipe wood water resistant?
For longevity, ipe requires maintenance. Above: Left unfinished, a water-resistant ipe deck has turned a silvery gray color. See more in In Seattle, An Urban Landscape Designed for Privacy and Indoor/Outdoor Flow. Photograph by Rafael Soldi.
Is it OK to pressure wash IPE?
For No Maintenance If you decide to bring back the natural finish colour, you simply need to pressure wash your deck. We recommend the Saicos Wood Brightener (follow product instructions), followed by a light sanding to smooth the surface – and it’s done!
How do you keep IPE looking new?
Does Cumaru need to be sealed?
All cuts should be sealed immediately with a clear wax to prevent end checks and adverse movement. We sell end grain sealant by the quart, which is enough for 500 square feet of Cumaru decking. Apply the sealant with a paint brush. Do not apply end seal to the surface of the decking.
Is Cumaru good for decking?
Ipe and Cumaru are incredibly scratch resistant and are often selected for high traffic decking areas from boardwalks and walkways to backyard decks.
What does Massaranduba look like?
Massaranduba has no distinctive odor or taste. Tree: The massaranduba tree is usually large, attaining heights of 30 to 50 meters, with diameters of 60 to 120 cm, sometimes reaching 1.8 m. Trees are usually swollen at the base, and boles are often straight and clear to about 18 m.
What is Massaranduba decking?
More Info: Massaranduba is stocked by Nova in typical decking sizes of 1×4, 5/4×4, 1×6 and 5/4×6. This material can be run to custom patterns as well including paneling, rainscreen siding, interior flooring and portch flooring. Color: Heartwood color is dark reddish brown to dark red. Sapwood color is pink.
What can be done with Massaranduba?
The finish of Massaranduba no problems. Hydraulic structures in shipworm free areas, decks, flooring, sleepers and garden timber. Furthermore, for turning and billiard cues, knobs and handles, parquet and strip flooring, heavy frames, exterior joinery such as staircases and terraces, industrial floors, engineering works, turning and violin bows
What is Massaranduba class catergorie3?
Massaranduba class Catergorie3/Tropisch/NEN 5493 is divided into strength class D70 (EN 338) Massaranduba is surprisingly easy to work for as a heavy wood and despite its density. It machines and finishes to a very smooth surface. The timber takes a fine polish and has the appearance of walnut.