What kind of oil do I put in my 2003 BMW X5?
Castrol Edge Synthetic Motor Oil 5W-30 1 Quart.
What kind of oil should I put in my BMW X5?
Valvoline – European Vehicle Full Synthetic SAE 5W-40 Motor Oil, 1 Quart (Part No. VV966)
What type of oil does a BMW X5 3.0 take?
7 liters 0W-20 BMW X5 engine oil, oil filter, and hardware for 2019-21 3.0L B58 gasoline engine. Highly advanced RAVENOL USVO fully synthetic oil technology carries OEM Approved BMW Longlife-17FE+ oil specification.
What kind of oil does a BMW 2003 take?
Engine Oil
| Viscosity: | All TEMPS….5W-30, 0W-30 |
|---|---|
| Capacity: | With filter 6.9 quartsAfter refill check oil level. |
| Torque: | Oil Drain Plug…M18x1.5 – 26 ft/lbs Oil Drain Plug…M12x1.5 – 19 ft/lbs Oil Drain Plug…M22x1.5 – 45 ft/lbs |
What oil does a 2004 BMW X5 take?
The three engine options available are 5w30 or 5w40 synthetic oil in the 2004 BMW X5. 7.9 quarts of oil is needed for the 3.0l v6 base motor. 8.5 quarts of oil is needed for both the 4.4l v8 engine option and the 4.8l v8 engine option.
What kind of oil does a 2002 BMW X5 take?
What is the difference between 5w30 and 5w40?
In practice, this means that each oil is just as viscous at lower temperatures and will remain viscous at -30°C, however 5w40 oil outperforms 5w30 oils at higher temperatures, being effective up to ambient temperatures of 50°C, as opposed to 30°C.
What type of oil does a 2004 BMW X5 use?
Castrol Edge Synthetic Motor Oil 5W-40 5 Quart.
How many quarts of oil does a BMW X5 3.0 take?
6.9 quartsAfter
Capacity: With filter 6.9 quartsAfter refill check oil level.
What engine oil does BMW use?
Most BMW engine comes with a 5W-30 from the factory. BMW also recommends an oil change interval of 15,000 miles. The brands that BMW uses are the Mobil Full Synthetic 5W-30 High Mileage, Mobil 1 SAE 0W-40, Valvoline SynPower SAE 5W-30 or Castrol Syntec European Formula SAE 0W-30.
What kind of oil does a 2003 BMW 325ci take?
Valvoline – European Vehicle SAE 5W-40 Full Synthetic Motor Oil, 5 Quart (Part No. 881166)
How many quarts of oil does a 2003 BMW 325i take?
For Automatic Transmission: 5L40-E…. AF3
| Notes: | Dexron III. Only use this recommendation if the Transmission oil pan is labeled with Dexron III. Do not mix Dexron III with Texaco ETL-7045 fluid. |
|---|---|
| Capacity: | 5 speed 5L40-E Total Fill 9.5 quarts 4.2 quarts Initial Fill |
What kind of oil does a BMW X5 take?
There are many BMW oil specifications, you should check your car manual to choose the right oil for your X5 car. For BMW vehicles, the most common types are those with the 0w30, 5w30, and 5w40 oil grades. These oils perform equally well under hot temperatures.
Does BMW make their own oil?
Like any other car manufacturer, BMW does not manufacture oils. But their vehicles require specific oils that are stable and have a wide range of viscosity. For identification purposes, there are specific codes that guide you on the best oil for your vehicle. You will get this information on your car manual or the manufacturers’ website.
What do the letters in the BMW oil specification mean?
All the oils with the BMW oil specification begin with the letters BMW, followed by LL to denote Longlife and then numbers and letters representing viscosity and any other particular characteristic. For example, FE for fuel economy and 14+ for vehicles manufactured in 2014 onwards.
Can BMW ll-04 be used for gasoline engines?
CAUTION: BMW LL-04 can be used for gasoline engines only in European Union countries, Switzerland, Norway, and Liechtenstein. OEM approved LL-12FE Facilitate cold start