How much does it cost to replace fork seals on a motorcycle?
Cost: $150 – $400 Motorcycle shops and dealers costs vary greatly depending upon where you live geographically but from the feedback we hear from our customers is they were quoted as low as $150 and as high as $400 to have a shop fully remove the forks and replace the fork seals.
Can you change fork seals without removing forks?
Yes. Pull the bolt out that secures the cartridge to the lower fork leg and the forks will come apart. Put a seal in with a split type fork seal driver.
How much does it cost to have fork seals done?
Replacing your fork seals can cost between $50 and several hundred, depending on who does the work. If you take your motorcycle or dirt bike to a local garage, you should expect to pay $120-$175.
Is it hard to replace fork seals?
Replacing your fork seals is an easy enough job if you know a few tricks. The first step to any DIY job is to do a little research and get all the parts you’ll need for the job. You’ll at least need the new seals and fork oil but should also consider wipers, bushings and any seals or o-rings for the caps.
Is it safe to ride a motorcycle with leaking fork seals?
You should notride with a bad fork seal for many reasons, safety being number one. A bad fork seal could leak oil onto your brake calipers, resulting in trouble decelerating and stopping the bike. That, plus poor shock absorption and an unbalanced ride makes a leaky fork seal dangerous to ride on.
How often should you replace fork seals?
Replace Fork Seals Fork seals should be replaced after 40 hours of riding or two years if you don’t ride very often. Even if you regularly clean the seals, they wear out eventually and leak no matter what you do to keep a tight seal.
How long does it take to change fork seals on a motorcycle?
around two hours
Set aside around two hours to replace the fork seals. Gather all the parts and tools you’ll need in advance. Even if you only need to replace one seal, replace them in pairs to keep them on equal footing. The parts are usually under $20.
How long should fork seals last?
How do you know if your fork seals are blown?
A trick to help you tell if your fork seals are leaking is to take a clean cloth and wipe the lower part of the forks. Once both the forks are clean, take your bike out for a quick spin. If you notice oil or grime around the forks at the end of your ride, there’s a good chance that the fork seals need to be replaced.