How do I calibrate my Datamax I Class printer?
Quick Calibration > while the labels are installed press and hold the ‘Feed’ button for 10 seconds then release and at that point the printer should state “Calibration Complete” you might see the word pause on the printer display at that point press the ‘Pause’ button then the printer should state ready on its display.
How do I reset my Datamax class?
To Factory Default the Datamax I-Class Mark II [G2] industrial printer: using its front-panel menu… The first thing we need to do is enable the ‘Advanced Menu’ mode. This can be done trough ‘Menu’ > ‘System Settings’ > ‘Menu mode’ > ‘Advanced menu’. At this point, the Factory Default may be Confirmed or Cancelled…
How do you fix the Top of Form fault on Datamax printer?
Either try the quick calibration by holding down the ‘FEED’ button for ten seconds or manual calibration ‘MENU’ > ‘MEDIA SETTINGS’ > ‘SENSOR CALIBRATION’ > ‘PERFORM CALIBRATION’ > ‘YES’, go through the calibration and see what the sensor reading numbers are.
How do I reset my Datamax label printer?
Factory Reset
- In the Desktop program RevolutionEHR Printing, access Utilities > Printer Diagnostics.
- Select the appropriate Datamax printer.
- Within the menu for Printer Diagnostics, access Printer Settings > Datamax > Restore Factory Defaults.
- Click ‘Send.
- Follow the instructions for Media Calibration.
How do I perform the calibration on the Datamax-O’Neil desk top printer?
To perform the calibration on the Datamax-O’Neil desk top printer while also eliminating the extra label when printing. First perform the quick calibration. Then continue with the standard calibration if the quick calibration did not help. Then continue with the advanced calibration if the resolution is not reached.
How do I contact Datamax?
Operator’s Manual Datamax International Herbert House 12 Elizabeth Way, Pinnacles Harlow, Essex CM19 5FE UK Phone: +44 1279 772200 Fax: +44 1279 424448 Asia-Pacific 19 Loyang Way #01-01 CILC Building Singapore 508724 Phone: +65 542-2611 Fax: +65 542-3611 Corporate Headquarters
What is module Y on the standard Datamax printer?
y The Standard Datamax Printer leaves the factory with EFIGS loaded into module Y. At this point, Module Y is LOCKED and will only accept additional Language Downloads. y After downloading a language update, Module Y is left UNLOCKED until the printer is reset or power is cycled.
Where can I find the model number of my Datamax printer?
If you wish to write custom label programs, a copy of the I & W Class Programmer’s Manual is included on the enclosed Datamax Accessories CD; otherwise, a copy may be downloaded from our web site at http//www.datamaxcorp.com. The printer’s model number is located on the Serial Tag on the back of the unit.