What do you do in a forklift test?
This part of the test can be workplace-specific, and will concentrate on the characteristics of the forklift, how to operate the truck safely, how to refuel or recharge the unit, how to inspect the unit prior to operation, and understanding the importance of pedestrian behaviours in the workplace.
What is the most common type of lift truck accident?
forklift overturns
The most common type of lift truck accident is one of the most fatal: being crushed by a lift truck. The Centers for Disease Control and Prevention (CDC) says that most fatal lift truck accidents happen when a worker is crushed by a forklift overturns or falls from a loading dock.
What are the three major parts of a lift truck?
The three major parts of a lift truck are the body (truck), overhead guard, and hydraulic lift.
What is load test for forklift?
Load testing is a requirement by law and every 12 months a forklift must be load tested to 110% capacity as well as having a number of checks carried out. We quote on the load testing based on the size of the forklift and the location. A forklift without a valid load test is illegal.
How many questions are on the forklift written test?
Written 30 non-critical questions – 90% to pass.
Can you fail forklift test?
Can you fail forklift training? Yes. But don’t worry, you can retake the training if need be. However, you may be required to pay for the training again.
What is the number 1 cause of lift truck accidents?
However, the statistics show that the greatest hazard is being crushed when the forklift tips over. According to OSHA in the United States, 70% of forklift accidents could have been avoided with standardized training and safety procedures.
Which of the following are common causes of lift truck accidents?
The main reason for Forklift accidents is the lack of proper Forklift Training and lack of Forklift Certification given by the Company. There are still many companies allowing Forklift Operators drive the equipment without a Forklift License or a proper Forklift Training.
What is the most important safety device on your lift truck?
Brakes. Brakes are the absolute most important safety feature on any motorized vehicle. If the brakes malfunction, accidents are unavoidable. At the beginning of each shift, operators are required by law to complete a full safety inspection.
What is the most important part of a forklift?
The Driver. By far, the most important part of a forklift is the operator.
How often is a load test required?
once every four years
The Crane Manufacturers Association of America standard CMAA Specification 78, section 4.7: Cites the load test requirements of OSHA 1910.179 and states a load test should be performed at a minimum of once every four years at 100% load with a pre-test and post-test inspection per periodic inspection guidelines, and …
How high should a load be carried on a forklift?
You should carry a load on a forklift 4 to 6 inches off the ground. Carrying a load slightly off the ground helps improve stability, avoid hitting obstacles and pedestrians, and reduce fork wear. You need to prepare your load before lifting it.
How to write a test case document?
They should be written in a way that offers the tester ease to conduct the complete testing by following the steps defined in each of the tests. In addition, the test case document should contain as many cases as required to provide complete test coverage.
What is a negative test case for a lift?
Negative Test Cases for Lift Add one more person than the specified weight and check the response. Add a number of people regardless of weight and check the volume limitations. Create smoke or fire inside the lift and check the response.
How do I test my lift?
Try pressing the open button while the lift is moving. Press the stop button before reaching the specific floor. Put small obstacles near the sensors that detect auto-close functionality. You can ofcourse come up with many more test cases based on the available data.
How to create test cases in test automation?
Create test cases that are as simple as possible. They must be clear and concise as the author of the test case may not execute them. Use assertive language like go to the home page, enter data, click on this and so on. This makes the understanding the test steps easy and tests execution faster.