What diameter is brake cable?
Most brake cables are 1.5 or 1.6mm in diameter. Most shift cables are 1.1 or 1.2mm, galvanized shifter cables are 1.3mm.
What diameter is brake cable housing?
Generally 4mm is for shift housing, 5mm for brake housing. The two types of housing aren’t constructed the same and generally you don’t want to use shift housing for your brakes (but some do it).
Are shimano and SRAM cables the same?
Shimano designed their housing to be used with their polymer-coated cables and SRAM has a similar system. Otherwise, I use 4 and 5 mm polished stainless steel cables, often in 3,300 mm length since most bikes have internal routing nowadays.
Can you use shifter cable housing for brakes?
shift housing is NOT designed to take the compression that can be generated under braking forces. it will split and fail. let me repeat… NO, DO NOT DO THIS.
Are Shimano and SRAM cables interchangeable?
The SRAM rear derailleur (mech) will not work with a Shimano shifter as is; the cable pull and shift activation ratios are not the same between the two systems.
Can you use MTB brake cable road bike?
Both the housing and the inner wire by any name brand are different on road bikes and MTBs. And this is not just only the shape of the cable end, which makes it physically impossible to attach a road bike cable to an MTB lever. It’s also in the structure of the inner wire and the cable.
Are gear and brake cables the same?
Gear cables are wound through particularly tight curves within the shifters too, which means there’s a lot of potential for wear. Brake cables normally have an easier time of it because their runs are straighter, but there’s much more force travelling through them.
Is there a difference between brake cable housing and shifter cable housing?
Brake housing consists of an inner liner, spirally wound stainless steel wire, and an outer plastic sheath. This design makes for good, consistent braking performance. Shift housing, similar to brake housing, uses steel surrounding an inner liner, and then coated in plastic to impede moisture infiltration.
Can you mix Shimano and SRAM brakes?
Most importantly, YOU CANNOT mix Shimano and SRAM hydraulic brake parts. It’s more than a performance issue — it’s a safety issue. Shimano brakes employ mineral oil as hydraulic fluid, whereas SRAM uses DOT brake fluid. Those are incompatible — one is insoluble in water, and the other is water soluble.
Can you use bike brake cable for gears?
You can’t mix-and-match gear cables and brake cables – you need the right set of inners and outers for each job. Using gear cables for brake cables is exceptionally dangerous and you should never do it.
Can you use a gear cable housing for a brake cable?
You can’t mix and match gear cables and brake cables – you need the right set of inners and outers for each job. Using gear cables for brake cables is exceptionally dangerous and you should never do it. You run the risk of them snapping at the worst possible moment, with potentially very serious consequences.
Can you run a Shimano chain on a SRAM cassette?
SRAM’s cassettes and chains are compatible with all of Shimano’s groupsets, and vice versa. Likewise, Shimano and SRAM buyers have the freedom to mix different levels of chains and cassettes so long as they are designed for the same kind of transmission.
What kind of cable does Shimano use for shifting?
It features a corrosion-resistant stainless steel inner cable and uses the same top-shelf housing as more expensive Shimano cable sets. The OT-SP4 set delivers crisp, reliable shifting and is a higher quality set than the cables that come on most new bikes today.
What is Shimano optislick shift cable set?
One step up is Shimano’s OPTISLICK Shift Cable Set, which utilizes a stainless steel inner cable and receives Shimano’s OPTISLICK coating to reduce friction. The housing is the same pre-lubricated SP41 as the stainless steel set, but the housing ferrules with the OPTISLICK set feature improved seals.
How do Shimano shifters reduce friction when shifting?
This reduces the amount of surface area in contact with the housing liner, which helps decrease friction when shifting. The spaces between the polymers also act as grease traps, keeping everything well lubricated and further reducing friction. This set also comes with sealed Shimano ferrules, which are another important consideration.
What is the best Shimano bike housing for You?
For housing, Shimano’s SP41 housing is the top pick for premium performance and durability. It utilizes a super slick inner liner tube made of durable plastic and is filled with special cable grease along its entire length to reduce friction.