Can I refurb my own alloys?
You can refurbish your own alloy wheels with time and patience. You will need all the materials and tools for each step of the process readily at hand, from basic masking tape to primer, lots of sandpaper and the finishing clear coat. The end result of an alloy refurbishment is to make a wheel look brand-new.
Can cracked alloys be refurbished?
Cracked alloys are typically more serious than a scuffed alloy, but most cracks can be repaired by a professional. It can be difficult to spot cracks in alloys, due to dirt and grime on the wheels.
How many times can alloys be refurbished?
Generally speaking, you can repair or recut your alloy wheels 1 to 2 times. However, the technician working on your alloy wheels will be able to advise you accordingly.
Can Kerbed alloys be repaired?
If the kerb damage is minor, however, repairing an alloy wheel isn’t as tricky as you think. A wide variety of DIY repair kits are available that contain everything you need, including sandpaper, filler, primer and paint.
Is a cracked alloy an MOT failure?
Section 5.2. 2 of the revised MOT testing standards for Class 3 – 7 vehicles states that a fractured wheel rim is a Dangerous defect. This means that the MOT bay must issue a fail certificate for any vehicle that is being tested and this defect is noted.
Is it worth repairing a cracked alloy wheel?
The structural fidelity of a car’s wheels is fundamental to its safety so it’s not worth messing about with this. If you or the professional inspecting the cracked wheel have any doubts at all, it’s best to throw the damaged alloy away. A wheel that’s noticeably bent through impact should be binned.
Can badly Kerbed alloys be repaired?
Most scuffs and kerbing damage can be repaired easily, either with a standard painted refurbishment or with a Diamond cut finish.
Can badly damaged alloys be repaired?
Contrary to popular belief, alloy wheels can be repaired assuming they aren’t completely bent out of shape and ruined. Small scratches dents can be repaired, and in some cases, even slight bends can be straightened up for no issue.