How do I choose an electric motor for my RC plane?
If you select a motor with a higher kv and a smaller propeller the speed of the thrust will be higher, and as a result your plane will fly faster. For your first plane I recommend a motor kv between 850kv and 1500kv. The next factor to considering a motor is size.
How does an RC plane motor work?
An RC glow engine uses a glow plug to ignite its fuel and air mixture. Nitro engines are a type of glow engine. The glow plug is heated with electric current during the starting procedure after which the wires disconnected and a combination of residual heat and catalytic action of the plug ignites the fuel.
How does an electric RC plane work?
The transmitter communicates with a receiver within the craft that sends signals to servomechanisms (servos) which move the control surfaces based on the position of joysticks on the transmitter. The control surfaces, in turn, affect the orientation of the plane.
What motors are used in RC planes?
There are two main different motor types used in model aircraft: The brushed and the brushless. containing a stator and a rotor.
What is the difference between Inrunner and outrunner motors?
With conventional motors, the magnets are attached to a shaft that rotates on the inside of the stator coils. This is called an inrunner motor. With an outrunner motor the magnets are attached to a ring or sleeve on the outside of the stator coils.
What are the components of an RC plane?
Thanks hobbyking!
- Step 1: Transmitters. The transmitter is what you use to control your plane with.
- Step 2: Receivers.
- Step 3: ESC (Electronic Speed Controller)
- Step 4: Battery.
- Step 5: Motor.
- Step 6: Servos.
- Step 7: Soldering.
- Step 8: Connecting It All Up!
How long do electric RC planes fly?
Electric RC aircraft are not known for long flight times, with multirotors usually doing 20-45 minutes, while most fixed wings will struggle to get past two hours. [Matthew Heiskell] blew these numbers out of the water with a 10 hour 45 minute flight with an RC plane on battery power.
How do I choose an RC motor?
The easiest way to choose a motor peak power rating is simply based on the battery size. If you have experience in RC then it is pretty easy to predict battery run time based on the size of car and your driving style (or just check the forums).
What electric motor is equivalent to a glow engine?
Many large electric motors are comparable in weight to the glow engines they are replacing. For instance a AXI 4130 motor, which is equivalent to a . 60 size 2 cycle engine, weighs about 14 ounces. While the glow engine weighs about 18 ounces.
How do RC electric aircraft motors work?
The touching of the brushes essentially creates the timing and current to make the motor spin correctly. Brushless Motor: Type of electric motor used in RC electric aircraft. Brushless motors are much more powerful than traditional brushed motors, and are commonly used in electric aerobatic aircraft.
What type of electric motors are used in model aircraft?
Another type of electric motors for model aircraft are the so-called brushless. but they have higher efficiency. Typically between 80 to 90%. to wear, apart from the bearings. normally of permanent magnets. rotates inside it. the permanent magnets at lower temperature. They are 3-phase AC synchronous motors.
How to choose the right motor for your RC plane?
When it comes to choosing a motor for your RC plane, you’ll need to consider a few things. Those things include weight power and dimensions, in-runner or out-runner engines, the kv, gearboxes, electronic speed control, cut off voltage, and power selection.
Why choose brushless motors for RC airplanes?
Brushless motors have become the mainstay of e-powered, RC airplanes, and there are many reasons why they have become so dominant in the RC industry. Compared with traditional motors, brushless motors have better speed, greater power, are light-weight and have a greater longevity.