How do I fix Error 49 on HP printer?

How do I fix Error 49 on HP printer?

Turn the printer power off, and then on. Power off and disconnect any external accessories, fax cards, and third-party USB drives. If this clears the error, reconnect each component one at a time, and then print a Configuration page after each component is replaced.

How do I fix Error 49.4 c02?

How can I solve HP printer error 49.4c02?

1. Delete any jobs in the print queue.
2. Print a test page.
3. Disable Advance Printing Features.
4. Check whether you’re using the Franklin Gothic Book font.
5. Flash and update the firmware.
6. Contact your printer’s manufacturer.

How do I fix Error 49?

Turn the printer off, unplug the printer from the network/computer, clear any pending jobs from the print queue (on the computer), then reboot the printer to make the 49 error disappear. Then you can reconnect the network/computer cable and try printing again.

How do I update firmware on my HP printer?

Make sure the printer is on and connected to your computer. Go to HP Software and Driver Downloads, and then enter your printer model. Select Firmware from the list of drivers, click Download next to the update, and then follow the instructions.

How do I fix service error 79?

Solution: 79 Service error Turn off then on Turn the printer power off, wait at least 30 seconds, and then turn the power on and wait for it to initialize. If you are using a surge protector, remove it and plug the printer directly into the wall socket. Turn the printer power on.

How do I bypass HP ink error?

To override HP ink cartridge error, remove and reinstall the indicated cartridge 2-3 times until it firmly seats in the slot. Then turn off the printer and remove all cartridges. Gently, with a dry lint-free cloth, wipe the contacts on the cartridge and carriage to remove any dirt or residue.

How do I reset my HP printer firmware?

➜ How To Reset HP Printer to Factory Settings

1. Turn the printer off. Disconnect the power cable from the printer for 30 seconds and then reconnect.
2. Turn the printer on while you press and hold the Resume button for 10-20 seconds. The Attention light turns on.
3. Release the Resume button.

How do I update my HP Laserjet firmware?

To update the firmware using the HP Easy Firmware Upgrade utility, follow these steps.

1. Download the HP Easy Firmware Upgrade utility file to the desktop.
2. Double-click on the HP Easy Firmware Upgrade utility file.
3. Use the drop-down arrow to select the printer to upgrade.
4. Click the Send Firmware button.

How do I fix Error 79 on HP printer?

Solution: 79 Error Turn off then on

1. Turn the printer power off, wait at least 30 seconds, and then turn the power on and wait for it to initialize.
2. If you are using a surge protector, remove it and plug the printer directly into the wall socket.

How do I get my HP printer to recognize my refilled cartridge?

Your printer remembers empty cartridges Here, you can fix the situation yourself – you’ll just need an additional full cartridge. Remove the empty cartridge and refill it. Insert an additional full cartridge into the printer. Turn on the printer and wait for it to recognize the cartridge.

Why does my HP printer keep saying cartridge problem?

Check/Wipe Cartridge Contacts: A common cause of the “Cartridge Problem” message is the gold contacts found on an electonic chip on the body of the HP cartridge being obscured with dirt/ink or even physically having been damaged. Firstly remove the indicated cartridge from the printer and locate the chip.