What are the three most common causes of falls on aerial work platforms?
An average of 26 construction workers die each year from using aerial lifts. This is 2 to 3% of all construction deaths. On aerial lifts, the major causes are falls, electrocutions, and collapses or tipovers.
Are aerial lifts safe?
The heights that aerial lifts reach create dangerous situations unique to these machines. For example, strong winds are dangerous working conditions for aerial lifts since winds have the potential to tip an aerial lift over. Here’s a list of things to look out for: Personnel or objects falling.
What are potential hazards for aerial lifts and work areas?
OSHA states that the top aerial lift hazards are electrocutions, falls from elevations, tip-overs, collapses, being struck by falling objects, ejections from an aerial lift platform, entanglement, and contact with ceilings, power lines, and other objects.
What are the 4 types of falls?
The four types of falls go into categories based on what caused the fall. They include step, slip, trip and stump.
What are the most aerial lift accidents caused by?
1. Touching Power Lines. One of the leading causes of injury and death on aerial and scissor lifts is electrocution from overhead power lines.
What fall protection is required by OSHA when working on an aerial lift?
Use of a body belt with a tether anchored to the boom or basket (fall restraint system), Use of a body harness with a tether (fall restraint system), or. Use of a body harness with a lanyard (fall arrest system).
Are aerial lifts grounded?
(2)(A) When working near energized lines or equipment, aerial lift trucks shall be grounded or barricaded and considered as energized equipment, or the aerial lift truck boom shall be insulated for the voltage being worked on.
When it comes to aerial lift hazards and precautions you should?
Overhead Precautions
- Wear a hard hat.
- Be aware of clearances (ceiling, overhead and side protruding objects)
- Do not position aerial lifts between overhead hazards if possible.
- Until determined, treat all overhead lines as if they are energized power lines and stay at least 10 feet away.
What types of fall protection are required when working on an aerial lift with a boom arm?
Boom-supported elevating work platforms (ANSI/SIA A92. While using the lift, workers must ensure that guardrails are installed according to the manufacturer’s instructions and access gates are closed. Each worker must use a personal fall protection system with a body belt or body harness when on the platform.
What fall protection is required for an aerial lift?
Does OSHA require a harness in an aerial lift?
While OSHA doesn’t require safety harnesses for scissor lifts, they may be required due to contractor safety policies, local jurisdiction standards and other guidelines. From our perspective, it’s always a good idea to have a safety harness in place.
What is a fall OSHA?
A fall hazard is anything at your worksite that could cause you to lose your balance or lose bodily support and result in a fall. Any walking or working surface can be a potential fall hazard. Any time you are working at a height of four feet or. more, you are at risk. OSHA generally requires that.
Do aerial lifts require fall protection?
Employers must ensure that employees using personal fall arrest systems while working on aerial lifts at heights six feet or more above a lower level comply with §1926.502(d) of subpart M, specifically: Personal fall arrest systems, when stopping a fall, shall: …
Are bucket trucks safe?
Bucket truck workers must wear a fall-restraint safety belt system or a full-body harness fall arrest system. Fall arrest equipment, work positioning equipment or travel restricting equipment shall be used by employees working at elevated locations more than 4 feet above the ground.
How can you be safe when using the lift?
Do:
- Watch your step when getting in or out of an elevator to avoid tripping.
- Hold the handrail if one is available, and stand next to the walls, away from the door.
- Stay calm if you find yourself stuck in an elevator.
- Reassure and calm anyone who is panicked about being stuck in the elevator.
What do you need to know about aerial work platform training?
What you should know about Aerial Platform Training: An Aerial Work Platform is a versatile piece of equipment. They allow for significant reach, speed up the progress of jobs while generally reducing the overall risk if used properly.
What is an aerial work platform?
– Vertical movement – Lateral movement – Rotational movement ( cardinal direction) – Platform / basket movement — normally, the system automatically levels the platform, regardless of boom position, but some allow overrides, tilting up to 90° for work in difficult locations. – Ground movement (in self-propelled models)
What is an aerial work platform (AWP)?
Aerial work platforms — or AWPs, as they are more commonly known — are economical, portable models that lift one or two workers. These machines are also known as: Aluminum products, manlifts, personnel lifts, lifts, push-arounds and mobile elevating work platforms (MEWPs).
How to practice an aerial?
– want to grow your aerial skills – are eager to build a strong body & mind – enjoy feeling the power and motivation from a support community