What gauge is a 30 mil metal stud?
Thicknesses and Coatings
| Steel Framing Thickness Table | ||
|---|---|---|
| Designation Thickness (mils) | Minimum Thickness (in) | Reference Only Gauge No |
| 30 | 0.0296 | 20 – Drywall |
| 33 | 0.0329 | 20 – Structural |
| 43 | 0.0428 | 18 |
What gauge steel is 33 mil?
20 gauge
Thicknesses range from 33 mils (20 gauge) to 97 mils (12 gauge).
What does 600S162 54 mean?
600S162-54 600 S 162 – 54. Member depth in 1/100ths inches. Thus 600 means 600/100 = 6” Flange width in 1/100ths inches. Thus 162 means 162/100 = 1.625” or 1 5/8”
How thick is a 20 gauge metal stud?
For example, 20-gauge interior wall partition studs have a thickness of 0.76 mm (30 mil), while 20-gauge structural studs have a minimum thickness of 0.84 mm (33 mil).
How thick is metal stud?
Metal Stud Sizes The most common size stud is a 3 5/8″ wide stud. Combined with a layer of 5/8″ gypsum wall board on both sides will give a 4 7/8″ thick wall.
What are the most popular metal stud widths?
What is the actual size of a 2×4 metal stud?
A 2×4, for example, is really 3-1/2″ x 1-1/2″. Metal framing on the other hand, is referenced by actual size. As a result you will get exactly what you order. If you request a 3-5/8″ steel stud, you will receive a full 3-5/8″ width.
What MIL is 18ga?
| Nominal Gauge2 | Minimum Thickness3 (Inches) | Mils |
|---|---|---|
| 18 | 0.0428 | 43 |
| 16 | 0.0538 | 54 |
| 14 | 0.0677 | 68 |
| 12 | 0.0966 | 97 |
Is 20 gauge the same as 20 mil?
20 units – A 20 Gauge liner is 0.0185 inches thick. A 20 MIL liner is 0.0205 inches thick or approximately 11% thicker than a 20 Gauge liner.
What is a 600S162 43?
600S162-43 | 6″ Deep Structural C-Studs | CEMCO.
How do you read a steel stud size?
The Steel Stud Manufacturer’s Associates (SSMA) has adopted a sizing standard that moves away from ‘gauges’ and directly specifies the material thickness in mils (100ths of an inch). A 600S162-54 is a 6-inch (600) Stud (S) with a 1-5/8” flange (162) with a thickness of 0.054 in (54).