What is an ATX tower?
An ATX computer case is a PC case that complies to the ATX (Advanced Technology Extended) computer tower specifications. This standard was introduced by Intel in 1995 and defines acceptable sizes for motherboards, desktop computer cases, and computer power supplies.
Is ATX same as mid tower?
Full-tower and mid-tower cases both fit standard ATX motherboards—by far the most common motherboard size out there. Both can also fit smaller micro-ATX motherboards. Exact sizing varies from case to case, but most mid-towers run up to roughly 18 inches high and 8 or so inches wide.
Can ATX fit in full tower?
ATX motherboards can fit in most full-size and mid-size towers, but it’s rare to find a small form factor case that can fit a full size ATX board. There are larger cases designed to support the larger Extended ATX standard motherboards which can usually take ATX boards too.
How big is an ATX tower?
Types of motherboards
| Motherboard | Size |
|---|---|
| XL-ATX | 13.6 × 10.4 inches (345 × 264 mm) |
| Extended ATX | 12 × 13 inches (305 × 330 mm) |
| ATX | 12 × 9.6 inches (305 × 244 mm) |
| Mini ATX | 5.9 × 5.9 inches (284 × 208 mm) |
How do I know if my case is ATX?
An ATX case has a ~2″ x ~6″ slot above the 7th expansion slot. > > The hole is “above” all the card slots (as the case sets like a tower). > >
Do I need mid tower or full tower?
If your only concern is gaming, then you most likely don’t need a Full Tower case. But if you want a multi-slot GPU with an open-air cooler, a Mid Tower case with a decked-out fan configuration is probably going to be your best bet.
What are the 4 types of computer case?
There are four types of computer case size; full-tower, mid-tower, mini-tower, and SFF(Small Factor Form). You need to measure the size of the case then you will get to know which type of pc case you have.
Will an ATX motherboard fit in a Mini-tower?
Yes, if the mini-tower is ATX compatible.
Which is bigger ATX or mid tower?
ATX Full Tower Measuring in around 24-inches high, they are much taller than ATX mid-tower cases which are around 18-inches tall. For this reason, full-towers are a suitable size for a bunch of graphics cards, case fans, and a sweet water-cooling system with a bunch of LEDs.
How do I know if my motherboard is ATX?
Motherboard form factors are easily identified by their physical dimensions. An ATX motherboard size is 12 inches by 9.6 inches. An Extended ATX (EATX) measures 12 inches by 13 inches. A micro-ATX (mATX) motherboard measures 9.6 by 9.6 inches.
Is ATX Mid tower enough?
Most mid tower cases will fit ATX motherboards, perfectly adequate for the vast majority of gamers and setups.