What number do I use in the Ames lettering guide to draw lines spaced 1/8 apart?
If no middle guide line is desired, for 1/8″ lettering use the same 8 setting. If 3/32″ or 1/16″ heights are desired with no middle guide line use the 6 or 4 setting respectively at the bottom of the disc or use the index mark on the disc (near the 2/3 frac- tion) and set the disc at the desired mark on the frame.
What type of lettering is the accepted standard in manual drafting?
American Standard Vertical letters
The American Standard Vertical letters (Figure 12) have become the most accepted style of lettering used in the production of manual drafting. This lettering is a Gothic sans serif script, formed by a series of short strokes.
What are the 4 types of lettering?
Let’s get started!
- SANS SERIF. Sans serif lettering (a.k.a block letters) is one of the best starting points for lettering beginners.
- SERIF.
- CURSIVE.
- GOTHIC / BLACKLETTER CALLIGRAPHY.
- GRAFFITI.
- CREATIVE LETTERING.
- OTHER SUB-LETTERING STYLES.
Why do architects have the same handwriting?
Necessity: The Mother of Invention In the years before digital drafting tools became commonplace, having a uniform handwriting style was a necessity of a collaborative design process like architecture.
What are the main requirements of lettering?
The main requirement of lettering on engineering drawing are legibility, uniformity, ease and rapidity in execution. Both upright and inclined letter are suitable for general use. All letters should be capital, except where lower case letters are accepted internationally for abbreviations.
What is the difference between lettering and engineering lettering?
Lettering in Engineering drawing is the process of writing titles, subtitles, symbols, dimension value, notes, and other elements on a drawing. Lettering is used to specify details of an object on a drawing. Lettering is one type of freehand drawing.
What is a *Ames lettering guide?
The main purpose of the *Ames lettering guide is to swiftly produce evenly spaced lines and guides for writing, architecture or engineering work. The holes in the tool create consistent spacing and the rotating circle allows you to adjust the size of your x-height.
How do you use the Ames scale guide?
Start with the AMES guide is all the way to one side of the text area. Place the tip of your pencil in the top hole of your chosen scale, and slide the AMES guide along the top of the T-Square to the other side of the text area drawing a line as you go.
What is the size of the Alvin Ames lettering guide?
The Alvin Ames Lettering Guide is made of durable plastic and has both English and metric line spacing. It measures 3-7/8 ” × 2-3/8 ” (9.8 cm × 6 cm) . Alvin is a registered trademark.
What are the parts of the Ames guide?
The AMES guide is made of two parts: the body and the disk. The bottom of the body is flat so it can be placed against a ruler and slid side to side. The disk has 4 series of holes in it in different scales.