Why is it called a ball Pein Hammer?
It has two heads, one flat and the other, called the peen, rounded. It is distinguished from a cross-peen hammer, diagonal-peen hammer, point-peen hammer, or chisel-peen hammer by having a hemispherical peen.
What is the Pein of a hammer?
Ball pein hammers, sometimes referred to as the machinist hammer, are designed with one face flat and the other face rounded. The flat side is used for striking punches and chisels and the rounded head, called Pein or Peen, is useful for tasks such as rounding off edges of metal pins.
What sizes do Ball Pein Hammers come in?
Common head weights for ball peen hammers are four, eight, 12, and up to 32 ounces.
What is a cross Pein Pin hammer?
The Faithfull Cross Pein Pin Hammer – 113g is a small versatile hammer, also known as a telephone hammer. It is designed for the accurate installation of precision fixings, such as clips and panel pins. This hammer has been fitted with a solid hickory handle and is manufactured in accordance to BS876 standards.
What is a peen used for?
Available in various sizes and oz., the smaller ones are used by jewelry makers, whereas the bigger ones are used for shaping metal objects such as horseshoes, blades, and the metal body of vehicles, armor, etc. Small, easy to use, and handy, a ball-peen hammer is an essential tool for metalworkers.
Is ball peen hammer a driving tool?
The ball peen hammer was originally designed for peening, or shaping metal materials by hammering. One end of the head is ball-shaped for this purpose. The other end is flat and is used for driving.
Where is cross peen hammer used?
Cross Pein Hammers (aka Peen) are general purpose carpenter’s hammers used for driving in nails. They are also known as Warrington Pattern hammers.
What is a cross Pein Hammer used for in woodwork?
The cross pein is used to start off the tack or nail. If you hold a small nail or tack in you fingers it can be difficult to hit the head of the nail without hitting your fingers. The cross pein allows you to gentle tap the nail between your fingers without striking a finger or thumb.
What is the difference between a claw hammer and a ball peen hammer?
Claw hammers are built to drive nails and the hardness of their steel is designed accordingly. Brick hammers are designed to split bricks and hit a brick chisel. Ball peen hammers are designed to strike hardened tools such as cold chisels.
What kind of hammer do mechanics use?
Most hammers used in auto repair fit into the “machinist’s hammer” classification. The most common of these are the ball peen hammer, the cross peen hammer and the straight peen hammer.
What is a cross Pein hammer used for in woodwork?
Why is a Warrington hammer so called?
The Warrington hammer name has been in use since at least the 1860s, and likely takes its name from the town of Warrington in Cheshire, England.